Light Tower Riser (MAKER FILES ONLY)

If you want to mount your tower light high enough for good visibility, but there's no convenient place to mount it, this could be your answer.  This mounts on the right, rear corner of your machine.  It fits this light tower: https://amzn.to/4tk4Aui

It's designed to fit the Gen 1 Onefinity Elite.  I can work with you to customize it for your machine or a different light tower.

The light tower's cable runs down through tube, and is clamped into the base for stress relief.

You'll need:

• Two M4 threaded inserts
• Two M4x10 cap screws
• Four M5x10 cap screws
• Four M5 Nylon Lock Nuts
• 1" tubing (very inexpensive at Mendards)