18x50mm Drag Chain
18x50mm Drag Chain
Couldn't load pickup availability
These are 18x50mm inside the drag chain. They are the model that fits our Large Drag Chain Brackets. This an open-inside model. They are easy to open and re-close, unlike many other drag chains we've tested.
The drag chains are significantly larger than the stock drag chains. For example, they will hold:
- The stock Onefinity Elite cables
- PwnCNC spindle power cable
- Two 10mm coolant lines
- Three 6mm PwnCNC ATC air lines
- PwnCNC ATC motor sense cable
- J-Tech laser cable
- 4mm air-assist
- 8mm air blast line
- Two 6mm dust boot air lines
- One dust boot control cable
Share
I have a PWN CNC ATC System, Ugly Dog Sidekick Dustboot, J-Tech Laser and PWN CNC water cooled spindle with all the associated wire looms, hoses and cabling stuffed into the drag chains. There is a small amount of space remaining for some thin wires but not much.
Because I have Roudy Romans X Gantry Riser Blocks I did have to modify and 3d print the Y axis follower to be taller but it works perfectly.
Perfect fit, great quality product.