Two Button Sidecar
Two Button Sidecar
"Absolutely love it", Stephen c.
Add buttons for Park and Home to your G3 Touch.
This one is different. It doesn't prevent opening the G3 Touch enclosure. Simply grab the housing and pull it away from the mounting plate. It's held in place by magnets and reinforced by simple cleats.
Its compact design matches the design of the G3 Touch enclosure, so it looks nice too.
Unlike the others, the installation is a breeze, with just three wires to connect.
We print ours as a multi-color print on an X1 Carbon with Charcoal PLA Matte for the housing, back plate, and mounting plate, and white PLA Matte for the text, because the finish looks good.
FAST SHIPPING * EASY INSTALLATION
To assemble the electronics, you'll need:
- One 5.6k resistor: https://amzn.to/48lP1Hn
- Four 6mm M3 cap screws: https://amzn.to/3UGKXy4
- Four 8x3mm magnets: https://amzn.to/49zNEpE
- Two 12mm momentary press buttons: https://amzn.to/3HXltFk (The holes are 12mm, so at 11.8 these fit perfectly, and we like they way the light up. We'd suggest blue for Park and white for Home)
- 4ft of 22/4 stranded wire: https://amzn.to/3whnyJI
- Four small ferrules: https://amzn.to/3SytLs4
- Heat shrink: https://amzn.to/3I0vQIl
- M3 threaded inserts: https://amzn.to/42EV094
Tool:
- Soldering iron or hot air station: https://amzn.to/3W04Hxj
Optional:
- Helping hands: https://amzn.to/3uzAGJw
The above links are largely affiliate links. I get paid a small amount of sales from these links. I appreciate you using them if you plan to purchase these items, but of course, you can source your materials anywhere.
These are often made to order, so it could take a couple days to ship.
Share
I installed my sidecar in 15 minutes. I followed the instructions and it went without a hitch. I ordered the pre-assembled version. The workmanship was EXCELLENT and well worth the extra money. This is one HAPPY customer.
Awsome little piece of kit that really makes the Onefinity much quicker to set up and use. Super simple set up too. Had it installed in less than 5 min ;). Totally recommend this if you use your CNC a lot.
Absolutely love it