PwnCNC v9 Dust Hose Offset Adapter (Maker Files)

MAKER FILES ONLY

If you have a wide drag chain and use a rear-mount dust boot like the PwnCNC v9, you may want this offset adapter.  

It provides the additional clearance you need to prevent your dust host from rubbing on your drag chain trough.   It's designed to fit between the v9's body and the magnetic connector.  

We recommend attaching them via hot-glue so that they hold firm and are easily removed if you change your configuration.

You may also want to add the PwnCNC extension arms to provide similar clearance at the top.  Two 2" extension arms are used in this picture.  You can find those here .